AEVOMIND INSIGHTS — OPERATIONS

Equipment and asset tracking: what losing track really costs

12 October 2026 · 8 min read · By the AevoMind team

A brass and walnut tool shadow board holding a drill, spirit level, meter, step ladder and spanner in fitted recesses, with two small figures beside it

Losing track of equipment costs time, duplicate purchases and missed inspections. In an illustrative team of 15 people sharing tools, looking for kit, booking it out and chasing inspections take about 8.5 hours a week; with tagged equipment and a register updated by scanning, about 1.8. HSE expects inspection records to be kept at least until the next inspection.

The short answer

Losing track of equipment costs a business in three ways: the time spent looking for it, the money spent buying another one that was in a van all along, and the inspection that was missed because nobody knew it was due. The first is easy to count. The third is the one that matters most when something goes wrong.

This article covers what an asset register should hold, the arithmetic of the search, the inspection records HSE expects you to keep, and when tracking software earns its place. The inputs are illustrative; the method works with your own counts.

What an asset register should hold

That is the shape of inventory and asset tracking. The register is only as good as its last update, so the update has to happen when the kit changes hands — a scan on a phone, not a note for later.

A black stand holding small gold devices and tools, each hanging above a blank frosted-glass tag on a ring
A tag on every item turns “who had it last?” into a lookup rather than a search.

The arithmetic of the search

Take an illustrative team of 15 people sharing tools and equipment across vans and sites. If each person spends ten minutes looking for something twice a week, that is 300 minutes — 5 hours a week — before anyone has booked kit out or chased an inspection.

Where the hours go when nobody knows where the kit isIllustrative team of 15 people sharing tools and equipment: hours a week, without and with asset tracking
No trackingAsset tracking
Looking for equipment5.0 hrs1.0 hrs
Booking kit out and back in2.0 hrs0.5 hrs
Chasing inspections and finding certificates1.5 hrs0.3 hrs

Illustrative inputs, not client data: 2 searches per person a week at 10 minutes (2 with tracking); 4 bookings out or in per person at 2 minutes (30 seconds with a scan); inspection admin 1.5 hours (0.3). Totals: 8.5 hours a week, 1.8 with tracking.

Show the data
No trackingAsset tracking
Looking for equipment5.0 hrs1.0 hrs
Booking kit out and back in2.0 hrs0.5 hrs
Chasing inspections and finding certificates1.5 hrs0.3 hrs

Across the three tasks, that is 8.5 hours a week without tracking against 1.8 with tagged kit and a register updated by scanning — about 6.7 hours back. Multiply by 4.33 for a month (about 29 hours) and divide by 162.5, the hours in one UK full-time month: roughly 0.18 of a full-time person.

The hours are rarely the biggest cost. Equipment bought because the original could not be found, hired because nobody knew it was free, or written off because nobody noticed it had gone, usually costs more — and only a register can tell you how much.

A large heap of brass tools, boxes and parts covering a velvet table, with one tiny figure at its edge searching with a magnifying glass
Ten minutes a search, twice a week, for every person on the team.

The inspection records HSE expects

Under PUWER, HSE guidance says work equipment whose safety depends on how it is installed should be inspected after installation and before first use, and equipment exposed to conditions that could cause dangerous deterioration should be inspected at suitable intervals, set by risk assessment. The result should be recorded and the record kept at least until the next inspection. Records can be kept on a computer, provided they are held securely and can be produced on request.

Lifting equipment has its own regime under LOLER, with maximum intervals for thorough examination:

How often lifting equipment must be thoroughly examinedMaximum intervals under LOLER, unless a competent person's examination scheme sets others
Equipment used to lift people6 months
All lifting accessories6 months
All other lifting equipment12 months

From HSE guidance on thorough examinations of lifting equipment.

Show the data
Maximum interval
Equipment used to lift people6 months
All lifting accessories6 months
All other lifting equipment12 months

None of this needs a separate system. It needs each item to carry its own due date and certificate, and a reminder that reaches the right person before the date passes — the job of compliance tracking and notifications working from the same register. Take your own advice on how the regulations apply to your equipment.

A frosted-glass tablet lying on a black desk with a soft green glow on its screen, beside a gold pen
The register belongs on the device in your hand, at the moment the kit changes hands.

How tracking works in practice

  1. Tag every item with a code that a phone camera can read.
  2. Book kit out and in by scanning, so the register records who has it without anyone typing.
  3. Attach inspections and certificates to the item, with the next due date.
  4. Send reminders to the person who holds the item, before an inspection falls due.
  5. Link kit to jobs, so the schedule knows what equipment a job needs and where it is — see scheduling jobs in a spreadsheet and field service and mobile.

Where AI is heading

Business use of AI is widening rather than deepening. The Office for National Statistics found the average number of AI technologies used by businesses with ten or more employees that use AI barely moved, from 1.42 in September 2023 to 1.59 in June 2026, while the share of businesses using AI almost tripled.

AI is spreading faster than it is deepeningAverage number of AI technologies used, among UK businesses with 10 or more employees that use AI, September 2023 to June 2026
0121.421.59

Source: Office for National Statistics, Artificial intelligence in UK businesses: 2023 to 2026 (July 2026), Business Insights and Conditions Survey. Open Government Licence v3.0.

Show the data
PeriodTechnologies per business
Sep 20231.42
Dec 20231.41
Mar 20241.49
Jun 20241.48
Sep 20241.50
Dec 20241.48
Mar 20251.47
Jun 20251.54
Sep 20251.56
Dec 20251.54
Mar 20261.55
Jun 20261.59

For equipment, the practical next steps are narrow and useful: recognising an item from a photo when its tag is worn, reading a certificate and filling in the due date, and spotting kit that has not moved for months and could be sold or redeployed. All of them depend on a register that is already accurate.

A small brass ladder, a brass lifting hook and a magnifying glass with a blank brass tag tied on with string, laid out on green velvet
Ladders, lifting gear and certificates: the items where a missed date matters most.

Buy, connect or build

Buy an established asset tracking product if your kit lives in one place and your needs are standard. Connect it to scheduling and your staff mobile app, so the register updates as work happens. Build when equipment is bound up with your own process — for installers, the kit, the job and the handover paperwork often need to be one record, which we cover in field service software for installers and software for installers.

Frequently asked questions

What should an equipment asset register hold?

For each item: what it is and a unique identifier, where it is and who has it, its condition, when it was last inspected and when the next inspection is due, the certificates and records that go with it, and its purchase and warranty dates. The register is only useful if booking kit out and in updates it, rather than someone remembering to.

How long must work equipment inspection records be kept?

HSE guidance on PUWER says the result of an inspection should be recorded and the record kept at least until the next inspection of that equipment. Records do not have to be on paper, but if they are kept on a computer they should be held securely and made available to an enforcing authority on request.

How often does lifting equipment need a thorough examination?

Under LOLER, unless a competent person has drawn up an examination scheme setting other intervals, HSE guidance gives a maximum of 6 months for equipment used to lift people and for all lifting accessories, and 12 months for all other lifting equipment. A tracking system should flag each due date well before it arrives.

How much time does asset tracking save?

In an illustrative team of 15 people sharing tools and equipment, looking for kit, booking it out and in, and chasing inspections take about 8.5 hours a week. With tagged equipment and a register updated by scanning, that falls to about 1.8 hours, roughly 6.7 hours saved a week, or 0.18 of a full-time person. The duplicate purchases it prevents are usually worth more.

Is a spreadsheet good enough for tracking equipment?

For a handful of items kept in one place, yes. It stops working when kit moves between people, vans and sites, when several people need to update it, or when inspection dates matter for safety. At that point the register needs to be updated at the moment kit changes hands, which a spreadsheet cannot do on its own.